(2010-8-11)网络检测工具(Iperf)

(2010-8-11)网络检测工具(Iperf)

作者： 更新时间： 编辑文章 关键字： ,

概述

Iperf是一个网络性能测试工具。可以测试TCP和UDP带宽质量，可以测量最大TCP带宽，具有多种参数和UDP特性，可以报告带宽，延迟抖动和数据包丢失。Iperf在linux和windows平台均有二进制版本供自由使用。

Iperf was developed by NLANRDAST as a modern alternative for measuring maximum TCP and UDP bandwidth performance. Iperf allows the tuning of various parameters and UDP characteristics. Iperf reports bandwidth, delay jitter, datagram loss.

本文HTML永久地址 doc

软件下载

yum 安装：

rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm
rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
yum -y install iperf

源码安装：

tar xvf iperf-xxx.tar  #官方站：http://sourceforge.net/projects/iperf/
cd  iperf
./configure
make
make install

windows版本

下载：http://www.noc.ucf.edu/Tools/Iperf/

Iperf使用方法与参数说明

参数说明 -s 以server模式启动，eg：iperf –s 。Server端为数据的接收端。

-c host以client模式启动，host是server端地址，eg：iperf -c 222.35.11.23 。Client端为数据的发出端。

通用参数 -f [kmKM] 分别表示以Kbits, Mbits, KBytes, MBytes显示报告，默认以Mbits为单位,eg：iperf -c 222.35.11.23 -f K

-i sec 以秒为单位显示报告间隔，eg：iperf -c 222.35.11.23 -i 2

-l 缓冲区大小，默认是8KB,eg：iperf -c 222.35.11.23 -l 16

-m 显示tcp最大mtu值

-o 将报告和错误信息输出到文件eg：iperf -c 222.35.11.23 -o ciperflog.txt

-p 指定服务器端使用的端口或客户端所连接的端口eg：iperf -s -p 9999;iperf -c 222.35.11.23 -p 9999

-P 连接限制参数 例如-P 2 当两个连接建立后，服务器进程就会退出。如果这个参数设定为0，那么iperf 进程将持续监听端口，并且不限制连接数量

-u 使用udp协议

-w 指定TCP窗口大小，默认是8KB

-B 绑定一个主机地址或接口（当主机有多个地址或接口时使用该参数）

-C 兼容旧版本（当server端和client端版本不一样时使用）

-M 设定TCP数据包的最大mtu值

-N 设定TCP不延时

-V 传输ipv6数据包

server专用参数 -D 以服务方式运行ipserf，eg：iperf -s -D

-R 停止iperf服务，针对-D，eg：iperf -s -R

client端专用参数 -d 同时进行双向传输测试

-n 指定传输的字节数，eg：iperf -c 222.35.11.23 -n 100000

-r 单独进行双向传输测试

-t 测试时间，默认10秒,eg：iperf -c 222.35.11.23 -t 5

-F 指定需要传输的文件

-T 指定ttl值

应用实例

实例一

使用 iperf -s 命令将 Iperf 启动为 server 模式，在客户机上使用 iperf -c启动client模式。

服务器端：

[root@18 ~]# iperf -s
- -----------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
- -----------------------------------------------------------

客户端：

[root@vps2 ~]# iperf -c 218.64.131.18
- -----------------------------------------------------------
Client connecting to 218.64.131.18, TCP port 5001
TCP window size: 16.0 KByte (default)
- -----------------------------------------------------------
[  3] local 74.62.154.33 port 49896 connected with 218.64.131.18 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.1 sec  9.57 MBytes  7.92 Mbits/sec
[root@vps2 ~]#

上面可以测试到最大速度为7.92Mbits/sec 上面使用服务端和客户端的默认设置进行测试

实例二

服务器端设置

[root@18 ~]# iperf -s -w 300K
- -----------------------------------------------------------
Server listening on TCP port 5001
TCP window size:   216 KByte (WARNING: requested   300 KByte)
- -----------------------------------------------------------

客户端设置

[root@vps2 ~]# iperf -c 218.64.131.18 -f K -i 2 -w 300K  #设定报告间隔为2秒，服务器端和客户端的TCP窗口都开到300KB 
------------------------------------------------------------
Client connecting to 218.64.131.18, TCP port 5001
TCP window size:   256 KByte (WARNING: requested   300 KByte)
------------------------------------------------------------
 [  3] local 74.62.154.33 port 57566 connected with 218.64.131.18 port 5001
 [ ID] Interval       Transfer     Bandwidth
 [  3]  0.0- 2.0 sec    624 KBytes    312 KBytes/sec
 [  3]  2.0- 4.0 sec  1184 KBytes    592 KBytes/sec
 [  3]  4.0- 6.0 sec  1208 KBytes    604 KBytes/sec
 [  3]  6.0- 8.0 sec  1304 KBytes    652 KBytes/sec
 [  3]  8.0-10.0 sec  1344 KBytes    672 KBytes/sec
 [  3]  0.0-10.1 sec  5672 KBytes    562 KBytes/sec
 [root@vps2 ~]#


[root@vps2 ~]# iperf -c 218.64.131.18 -f K -i 2 -w 300K -n 1000000   #测试传输约1MB数据 
- -----------------------------------------------------------
Client connecting to 218.64.131.18, TCP port 5001
TCP window size:   256 KByte (WARNING: requested   300 KByte)
- -----------------------------------------------------------
[  3] local 74.62.154.33 port 58469 connected with 218.64.131.18 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 2.0 sec    824 KBytes    412 KBytes/sec
[  3]  0.0- 2.2 sec    984 KBytes    449 KBytes/sec
[root@vps2 ~]#


 [root@vps2 ~]# iperf -c 218.64.131.18 -f K -i 2 -w 300K -t 36   #测试持续36秒
- -----------------------------------------------------------
Client connecting to 218.64.131.18, TCP port 5001
TCP window size:   256 KByte (WARNING: requested   300 KByte)
- -----------------------------------------------------------
[  3] local 74.62.154.33 port 58836 connected with 218.64.131.18 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 2.0 sec    744 KBytes    372 KBytes/sec
[  3]  2.0- 4.0 sec  1280 KBytes    640 KBytes/sec
[  3]  4.0- 6.0 sec  1304 KBytes    652 KBytes/sec
[  3]  6.0- 8.0 sec  1312 KBytes    656 KBytes/sec
[  3]  8.0-10.0 sec  1296 KBytes    648 KBytes/sec
[  3] 10.0-12.0 sec  1296 KBytes    648 KBytes/sec
[  3] 12.0-14.0 sec  1288 KBytes    644 KBytes/sec
[  3] 14.0-16.0 sec  1168 KBytes    584 KBytes/sec
[  3] 16.0-18.0 sec  1304 KBytes    652 KBytes/sec
[  3] 18.0-20.0 sec  1248 KBytes    624 KBytes/sec
[  3] 20.0-22.0 sec    392 KBytes    196 KBytes/sec
[  3] 22.0-24.0 sec    712 KBytes    356 KBytes/sec
[  3] 24.0-26.0 sec    808 KBytes    404 KBytes/sec
[  3] 26.0-28.0 sec    888 KBytes    444 KBytes/sec
[  3] 28.0-30.0 sec    888 KBytes    444 KBytes/sec
[  3] 30.0-32.0 sec    896 KBytes    448 KBytes/sec
[  3] 32.0-34.0 sec    992 KBytes    496 KBytes/sec
[  3] 34.0-36.0 sec    960 KBytes    480 KBytes/sec
[  3]  0.0-36.2 sec  18784 KBytes    520 KBytes/sec
[root@vps2 ~]#   

[root@vps2 ~]# iperf -c 218.64.131.18 -f K -i 5 -w 300K -n 10400000 -d -t 60     #测试双向的传输 
- -----------------------------------------------------------
Server listening on TCP port 5001
TCP window size:   256 KByte (WARNING: requested   300 KByte)
- -----------------------------------------------------------
- -----------------------------------------------------------
Client connecting to 218.64.131.18, TCP port 5001
TCP window size:   256 KByte (WARNING: requested   300 KByte)
- -----------------------------------------------------------
[  5] local 74.62.154.33 port 36184 connected with 218.64.131.18 port 5001
[  4] local 74.62.154.33 port 5001 connected with 218.64.131.18 port 55946
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0- 5.0 sec  2720 KBytes    544 KBytes/sec
[  5]  5.0-10.0 sec  3336 KBytes    667 KBytes/sec
[  5] 10.0-15.0 sec  3256 KBytes    651 KBytes/sec
[  5] 15.0-20.0 sec  3232 KBytes    646 KBytes/sec
[  5] 20.0-25.0 sec  3032 KBytes    606 KBytes/sec
[  5] 25.0-30.0 sec  1304 KBytes    261 KBytes/sec
[  5] 30.0-35.0 sec  1536 KBytes    307 KBytes/sec
[  5] 35.0-40.0 sec  1464 KBytes    293 KBytes/sec
[  5] 40.0-45.0 sec  1704 KBytes    341 KBytes/sec
[  5] 45.0-50.0 sec  1992 KBytes    398 KBytes/sec
[  5] 50.0-55.0 sec  3408 KBytes    682 KBytes/sec
[  5] 55.0-60.0 sec  3416 KBytes    683 KBytes/sec
[  5]  0.0-60.2 sec  30408 KBytes    505 KBytes/sec
[  4]  0.0- 5.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4]  5.0-10.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 10.0-15.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 15.0-20.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 20.0-25.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 25.0-30.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 30.0-35.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 35.0-40.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 40.0-45.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 45.0-50.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4] 50.0-55.0 sec  0.00 KBytes  0.00 KBytes/sec
[  4]  0.0-60.0 sec  34952 KBytes    583 KBytes/sec
[root@vps2 ~]#


[root@vps2 ~]# iperf -c 218.64.131.18 -f K -i 2 -w 300K -u -t 10    #UDP测试
- -----------------------------------------------------------
Client connecting to 218.64.131.18, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size:   256 KByte (WARNING: requested   300 KByte)
- -----------------------------------------------------------
[  3] local 74.62.154.33 port 48551 connected with 218.64.131.18 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 2.0 sec  29360375 KBytes  14680187 KBytes/sec
[  3]  2.0- 4.0 sec  8388861 KBytes  4194430 KBytes/sec
[  3]  4.0- 6.0 sec  8388861 KBytes  4194430 KBytes/sec
[  3]  6.0- 8.0 sec  8388862 KBytes  4194431 KBytes/sec
[  3]  8.0-10.0 sec  8388861 KBytes  4194430 KBytes/sec
[  3]  0.0-10.0 sec  62915820 KBytes  6281749 KBytes/sec
[  3] Sent 893 datagrams
read failed: Connection refused
[  3] WARNING: did not receive ack of last datagram after 2 tries.
[root@vps2 ~]#

实例三：windows 测试实例

服务器端设置：

C:\>iperf.exe -s
- -----------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 8.00 KByte (default)
- -----------------------------------------------------------
[1864] local 218.64.131.18 port 5001 connected with 59.42.207.131 port 18875
[ ID] Interval       Transfer     Bandwidth
[1864]  0.0-15.4 sec   800 KBytes   426 Kbits/sec

客户端连接

C:\>iperf.exe -c 218.64.131.18 -i 5 -t 15
- -----------------------------------------------------------
Client connecting to 218.64.131.18, TCP port 5001
TCP window size: 8.00 KByte (default)
- -----------------------------------------------------------
[1912] local 192.168.3.12 port 1901 connected with 218.64.131.18 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0- 5.0 sec   264 KBytes   433 Kbits/sec
[1912]  5.0-10.0 sec   264 KBytes   433 Kbits/sec
[1912] 10.0-15.0 sec   264 KBytes   433 Kbits/sec
[1912]  0.0-15.4 sec   800 KBytes   425 Kbits/sec

C:\>

从上面可以看到本机传输到服务器的最大速度为425 Kbits/sec，我本机使用的ADSL宽带，所以速度慢一点。

加载中...

没有评论 :

发表评论